S9-M Series Oil-immersed Fully Sealed

Selection

Operating conditions

1. Ambient temperature: maximum temperature: +40°C, minimum temperature: -25℃ . 2. Average temperature of the hottest month:+30℃, average temperature in the hottest year: +20℃ . 3. Altitude not exceeding 1000m. 4. The waveform of the power supply voltage is similar to a sine wave. 5. The three-phase supply voltage should be approximately symmetrical. 6. The total harmonic content of the load current shall not exceed 5% of the rated current. 7. Where to use: indoors or outdoors.

Features

1. The product has the characteristics of high efficiency, low loss, low noise, etc. 2. High mechanical strength, balanced ampere-turn distribution, and strong short-circuit resistance. 3. Low no-load and load loss. 4. Small size, reliable operation, long service life, and maintenance free.

Structure

■ Iron core: ● The iron core is made of high-quality, high-performance, high-permeability silicon steel sheet, with low no-load loss. ■ High/low voltage winding: ● The low-voltage winding of 500KVA and below is a layer type, and the new spiral type is used for 630KVA and above. ● It has the characteristics of high mechanical strength, balanced ampere turn distribution, and strong short-circuit resistance. ■ Fully sealed structure: ● The product is a fully sealed structure. The vacuum oil filling process is used for the transformer packaging, which completely removes the moisture of the transformer, ensures the isolation of the transformer oil from the outside air, prevents the aging of the oil, and improves the operation reliability of the transformer. ■ Positioning structure: ● The product body has added a positioning structure to prevent displacement during transportation, and all fasteners are equipped with fastening nuts to ensure that the fasteners do not loosen during long-term operation of the product. ■ Oil tank: ● The oil tank adopts a corrugated oil tank.Simple process, high mechanical strength,good welding effect,not easy to leak,due to the strong fluidity of the oil, the heat dissipation capacity of the product is improved. ■ Other configuration: ● Equipped with pressure relief valve, signal thermometer, ensures the safe operation of the transformer.

S9-M 30~2500/10KV technical data

Rated capacity (KVA)	Voltage combination			Connection group label	No-load loss(W)	Load   loss(W)	No-load curr (%) ent	Short circuit impedance	Dimensions			Total weight (kg)
	High voltage (KV)	Tapping range	Low voltage (KV)						L	W	H
30	6 6.3 10 10.5 11	±5 ±2×2.5	0.4	Dyn11 Yyn0 Yzn11	130	630/600	2.3	4.0	745	530	890	280
50					170	910/870	2		790	560	940	365
63					200	1090/1040	1.9		820	570	950	425
80					250	1310/1250	1.9		850	580	1000	485
100					290	1580/1500	1.8		900	620	1010	540
125					340	1890/1800	1.7		880	630	1050	610
160					400	2310/2200	1.6		950	690	1120	710
200					480	2730/2600	1.5		990	730	1200	835
250					560	3200/3050	1.4		1180	700	1200	970
315					670	3830/3650	1.4		1230	760	1250	1125
400					800	4520/4300	1.3		1260	800	1300	1310
500					960	5410/5150	1.2		1400	900	1320	1530
630				Dyn11 Yyn0	1200	6200	1.1	4.5	1530	940	1350	1890
800					1400	7500	1		1580	1000	1420	2185
1000					1700	10300	1		1770	1180	1450	2480
1250					1950	12000	0.9		1920	1290	1430	3020
1600					2400	14500	0.8		1990	1340	1620	3550
2000					3000	17100	0.7	5.0	1950	1680	2100	4530
2500					3300	23200	0.7		2020	1710	2100	5030

Note 1: for transformers with rated capacity of 500kVA and below, the load loss values above the diagonal line in the table are applicable to the Dyn11 or Yzn11 coupling group, and the load loss values below the diagonal line are applicable to the Yyn0 coupling group. Note 2: when the average annual load rate of the transformer is between 35% and 40%, the maximum operating eficiency can be obtained by using the loss value in the table.

Overall and mounting dimensions(mm)

Note: The dimensions and weights provided are only for reference in design and selection. The final size and weight are subject to our product drawings.

S11-M 30~2500 /10KV technical data

Rated capacity (KVA)	Voltage combination			Connection group label	No-load loss(W)	Load   loss(W)	No-load curr (%) ent	Short circuit impedance	Dimensions			Total weight (kg)
	High voltage (KV)	Tapping range	Low voltage (KV)						L	W	H
30	6 6.3 10 10.5 11	±5 ±2×2.5	0.4	Dyn11 Yyn0 Yzn11	100	630/600	1.5	4.0	690	510	920	275
50					130	910/870	1.3		730	510	960	340
63					150	1090/1040	1.2		750	550	1000	385
80					180	1310/1250	1.2		790	620	1020	450
100					200	1580/1500	1.1		790	700	1040	520
125					240	1890/1800	1.1		840	800	1070	625
160					280	2310/2200	1		1070	670	1130	695
200					340	2730/2600	1		1140	750	1140	795
250					400	3200/3050	0.9		1200	800	1190	955
315					480	3830/3650	0.9		1300	860	1210	1085
400					570	4520/4300	0.8		1380	900	1240	1290
500					680	5410/5100	0.8		1450	950	1300	1590
630				Dyn11 Yyn0	810	6200	0.6	4.5	1500	970	1360	1850
800					980	7500	0.6		1660	1140	1400	2210
1000					1150	10300	0.6		1690	1190	1530	2570
1250					1360	12000	0.5		1760	1230	1600	3115
1600					1640	14500	0.5		1800	1250	1660	3520
2000					1940	18300	0.4	5.0	1930	1360	1490	4060
2500					2290	21200	0.4		2080	1360	1570	5105

Note 1: for transformers with rated capacity of 500kVA and below, the load loss values above the diagonal line in the table are applicable to the Dyn11 or Yzn11 coupling group, and the load loss values below the diagonal line are applicable to the Yyn0 coupling group. Note 2: when the average annual load rate of the transformer is between 35% and 40%, the maximum operating eficiency can be obtained by using the loss value in the table.

Overall and mounting dimensions(mm)

Note: The dimensions and weights provided are only for reference in design and selection. The final size and weight are subject to our product drawings.

S13-M 30~2500 /10KV technical data

Rated capacity (KVA)	Voltage combination			Connection group label	No-load loss(W)	Load   loss(W)	No-load curr (%) ent	Short circuit impedance	Dimensions			Total weight (kg)
	High voltage (KV)	Tapping range	Low voltage (KV)						L	W	H
30	6 6.3 10 10.5 11	±5 ±2×2.5	0.4	Dyn11 Yyn0 Yzn11	80	630/600	1.5	4.0	685	490	860	260
50					100	910/870	1.3		725	520	955	365
63					110	1090/1040	1.2		750	535	970	415
80					130	1310/1250	1.2		770	565	985	465
100					150	1580/1500	1.2		800	595	1000	545
125					170	1890/1800	1.1		815	670	1010	585
160					200	2310/2200	1.1		1015	645	1055	695
200					240	2730/2600	1		1020	650	1115	810
250					290	3200/3050	1		1140	730	1120	930
315					340	3830/3650	0.9		1195	785	1175	1075
400					410	4520/4300	0.9		1265	855	1195	1255
500					480	5410/5100	0.8		1325	915	1240	1435
630				Dyn11 Yyn0	570	6200	0.8	4.5	1465	960	1295	1880
800					700	7500	0.6		1515	995	1340	2145
1000					830	10300	0.6		1605	1095	1460	2455
1250					970	12000	0.5		1685	1145	1485	2840
1600					1170	14500	0.5		1775	1225	1580	3310
2000					1550	18300	0.4	5.0	1855	1265	1600	3960
2500					1830	21200	0.4		1885	1305	1780	4980

Note 1: for transformers with rated capacity of 500kVA and below, the load loss values above the diagonal line in the table are applicable to the Dyn11 or Yzn11 coupling group, and the load loss values below the diagonal line are applicable to the Yyn0 coupling group. Note 2: when the average annual load rate of the transformer is between 35% and 40%, the maximum operating eficiency can be obtained by using the loss value in the table.

Overall and mounting dimensions(mm)

Note: The dimensions and weights provided are only for reference in design and selection. The final size and weight are subject to our product drawings.

S14-M 30~2500 /10KV technical data

Rated capacity (KVA)	Voltage combination			Connection group label	No-load loss(W)	Load   loss(W)	No-load curr (%) ent	Short circuit impedance	Dimensions			Total weight (kg)
	High voltage (KV)	Tapping range	Low voltage (KV)						L	W	H
30	6 6.3 10 10.5 11	±5 ±2×2.5	0.4	Dyn11 Yyn0 Yzn11	80	505/480	1.5	4.0	785	710	880	370
50					100	730/695	1.3		800	730	940	480
63					110	870/830	1.2		815	720	970	535
80					130	1050/1000	1.2		830	740	990	580
100					150	1260/1200	1.1		875	790	1010	705
125					170	1510/1440	1.1		875	770	1050	775
160					200	1850/1760	1		935	820	1140	975
200					240	2180/2080	1		995	870	1140	1140
250					290	2560/2440	0.9		995	900	1180	1240
315					340	3060/2920	0.9		1030	880	1250	1425
400					410	3610/3440	0.8		1075	910	1270	1635
500					480	4330/4120	0.8		1120	930	1320	1950
630				Dyn11 Yyn0	570	4960	0.6	4.5	1165	950	1350	2150
800					700	6000	0.6		1210	1050	1390	2515
1000					830	8240	0.6		1520	1020	1450	2635
1250					970	9600	0.5		1630	1090	1540	3210
1600					1170	11600	0.5		1680	1150	1600	3905
2000					1550	14600	0.4	5.0	1890	1300	1600	4130
2500					1830	16900	0.4		1990	1360	1700	5250

Note 1: for transformers with rated capacity of 500kVA and below, the load loss values above the diagonal line in the table are applicable to the Dyn11 or Yzn11 coupling group, and the load loss values below the diagonal line are applicable to the Yyn0 coupling group. Note 2: when the average annual load rate of the transformer is between 35% and 40%, the maximum operating eficiency can be obtained by using the loss value in the table.

Overall and mounting dimensions(mm)

Note: The dimensions and weights provided are only for reference in design and selection. The final size and weight are subject to our product drawings.